Preparation and Crystal Structure of Potassium Iron Hydrogen Phosphate,KFe3(HPO4)2(H2PO4)6 · 4 H2O

Single crystals of potassium iron hydrogen phosphate, KFe₃(HPO₄)₂(H₂PO₄)₆ · 4 H₂O, were prepared hydrothermally by heating a mixture of Fe₂O₃, H₃PO₄ and K₂CO₃ with a small amount of water. It crystallizes monoclinic, space group C2/c (N° 15 Int. Tab.) with Z = 4 and a = 1701(2), b = 960.4(5), c = 1750(1) pm, β = 90.88(7)°. The crystal structure was solved by using 1716 unique reflections F₀ > 4σ(F₀) with a final wR2 value of 0.126 (SHELXL-93). The main feature of the crystal structure are layers formed by PO₄-tetrahedra around the FeO₆-octahedra parallel to (001). K⁺ and H₂O molecules connect these layers. Effective Coordination Numbers (ECoN), Mean Fictive Ionic Radii (MEFIR), Charge Distribution (CHARDI) and the Madelung Part of Lattice Energy (MAPLE) are calculated for the title compound. The existence of hydrogen bonds is confirmed by these calculations.     

Zur Kenntnis des Natrium-tetrahydroxoaluminat-chlorids Na2[Al(OH)4]Cl

On the Sodium Tetrahydroxoaluminate Chloride Na₂[Al(OH)₄]Cl The hitherto unknown compound Na₂[Al(OH)₄]Cl was prepared by crystallisation from a NaCl containing sodium aluminate solution. According to the X-ray single crystal investigation (tetragonal, space group P4/nmm, a = 7.541 Å, c = 5.059 Å, Z = 2) the compound represents the first example of a crystalline hydroxoaluminate with monomeric [Al(OH)₄]^? anions. Cl^? shows a quadratic anti prismatic coordination to 4 Na⁺ and over hydrogen bonds to 4 O^2? while Na⁺ is octahedrally coordinated by 4 O^2? and 2 Cl^? (axial). The results of the crystal structure analysis are confirmed by ²⁷Al and ²³Na MAS NMR investigations. Na₂[Al(OH)₄]Cl decomposes at about 200°C without intermediates under formation of β-NaAlO₂ and NaCl.     

硼化合物的研究——Ⅴ.氢硼酸π-芳烃-π-环戊二烯基铁的合成和性质

本文研究了氢硼酸根(B_(12)H_(12)~(2-)、B_(10)H_(10)~(1-)、B_(11)H_(14)~-)和π-芳烃-π-环戊二烯基铁阳离子的反应,合成了36个氢硼酸π-芳烃-π-环戊二烯基铁化合物。通过元素分析和红外光谱测定确定了化合物的组成。部份化合物还作了~1H NMR鉴定。对化合物的性质,包括它们的热行为,进行了较详细的研究。DTA仪测得的结果表明,(1)当阳离子相同时,化合物的热稳定性的顺序为:[ArFeC_5H_5]_2B_(12)H_(12)>[ArFeC_5H_5]_2B_(10)H_(10)>[ArFeC_5H_5]B_(11)H_(14);(2)当氢硼酸根相同时,其热稳定性受芳环上取代基的影响。     

基于离子液体的炭材料制备、改性及应用

离子液体因其熔点低、液态温域宽、蒸气压低、热稳定性高、电导率高、电化学窗口宽、结构可设计及对许多化合物的亲和性等系列性能而引起人们广泛关注。离子液体在炭材料制备、改性领域展示出了良好的前景及巨大的应用潜力,可直接作为碳源,经过高温炭化实现杂原子掺杂制备多孔炭材料;离子液体也可充当反应介质和致孔剂,将生物质转化为多孔炭材料;此外,由于离子液体与炭材料相容性较好,可以用于多孔炭材料改性制备炭复合材料。基于离子液体的炭材料在电催化、超级电容器、吸附分离及生物医学等领域具有潜在的应用价值。本文总结了基于离子液体炭材料的制备、改性及应用最新研究进展,并着重介绍了其在能源和环境相关领域的应用。     

微波消解凯氏定氮法快速测定酱油中全氮

研究了凯氏定氮法测定酱油中全氮时样品的微波消解方法，进行了微波消解条件的选择及消解结果精密度试验，并与国家标准方法对比，验证了方法的准确度。试验结果表明，消解完全仪需20min，相对标准偏差均小于2%（n=7），回收率范围为96%～103%，经t检验，微波溶样法与国家标准凯氏定氮法的测定结果无显著性差异。     

纳米尖晶石LixMn2O4的制备与电化学性能表征

Nano-spinel Li_xMn₂O₄(0.6 ≤x≤ 1.0) was synthesized by two steps of coprecipitation and calcination. The influences of calcination temperature, time and Li/Mn ratio on the crystal structure and the particle size of Li_xMn₂O₄ were investigated. It was shown that the higher the calcination temperature, the more complete the crystal structure, and the larger the particle size. Moreover, the influence of calcination time on the crystal structure was insignificant when it was more than 3h at 700℃. With the increase of x in Li_xMn₂O₄ in the range of 0.6～1.0, the d111 and lattice parameter a increased first and then decreased. The electrochemical properties of nano-spinel LiMn₂O₄ using as cathode material of lithium-ion battery were studied. The low discharge capacity might be due to the irreversible capacity loss brought by the large surface area and lattice vacancies of the nano-spinel.     

Effect of the reaction state on the polymerization of p-xylenesulfonium salts

1,4-Phenylenebis(methylene) sulfonium salts were polymerized under different conditions to yield p-xylylene sulfonium salt polyelectrolytes in a broad range of molecular weights. The aqueous reaction mixture formed a reversible gel at initial monomer concentrations higher than 1.0M, but at lower concentrations it remained as an emulsion until reaction completion. The effect of reaction time on intrinsic viscosities and polymer yields for both the emulsion and the gel state is discussed. The higher yields obtained when the reaction was carried out in the presence of a water-immiscible organic solvent were apparently due to the effect of this solvent on increasing the concentration of the reactive intermediate that led to the polyelectrolyte. Both the addition of an organic solvent and the variation of the initial monomer concentrations allowed some control over the molecular weight of the polyelectrolyte formed.     

Applications of ethylammonium and propylammonium nitrate solvents in liquid-liquid extraction and chromatography

Ethyl- and propylammonium nitrate are novel ionic solvents, liquid at room temperature, suitable for use as selective solvents for the isolation of analytes containing proton donor functional groups (alcohols, amines, phenols, carboxylic acids, etc.) by liquid-liquid distribution. These solvents form immiscible solvent pairs with non-polar aliphatic and aromatic hydrocarbons, ethers and alkyl halide solvents (e.g., methylene chloride, chloroform). Analytes can be recovered from the ionic solvents by back-extraction into ah organic solvent after dilution with water or pH buffer or, preferably, by extractive derivatization when gas chromatography is used for the analyses, avoiding the accumulation of salt on the column that results in poor baseline stability. Alkylation, acylation and particularly silylation are suitable methods for extractive derivatization using standard reaction conditions. Applications are presented for the isolation of polar analytes from an urban dust, shale oil and urine samples and for the determination of low-molecular-weight alcohols in gasahol and glycerol in soap. Liquid-liquid chromatographic systems with the liquid organic salt as stationary phase can be used to predict distribution constants for a particular separation and for the separation of polar solutes, particularly isomeric compounds possessing a proton donor functional group.     

Automated at-line solid-phase extraction-gas chromatographic analysis of micropollutants in water using the PrepStation

A fully automated at-line solid-phase extraction-gas chromatography procedure has been developed for the analysis of aqueous samples using the PrepStation. The sample extract is transferred from the sample preparation module to the gas chromatograph via an autosampler vial. With flame-ionization detection, limits of determination (S/N=10) of 0.05–0.13 μg/l were obtained for the analysis of HPLC-grade water when modifying the PrepStation by: (i) increasing the sample volume to 50 ml, (ii) increasing the injection volume up to 50 μl, and (iii) decreasing the desorption volume to 300 μl. The HP autosampler had to be modified to enable the automated “at-once” on-column injection of up to 50 μl of sample extract. The amount of packing material in the original cartridge had to be reduced to effect the decrease of the desorption volume. The total set-up did not require any further optimization after having set up the method once. The analytical characteristics of the organonitrogen and organophosphorus test analytes, i.e. recoveries (typically 75–105%), repeatability (2–8%) and linearity (0.09–3.0 μg/l) were satisfactory. The potential of the system was demonstrated by determining triazines and organophosphorus pesticides in river Rhine water at the 0.6 μg/l level using flame-ionization and mass-selective detection. No practical problems were observed during the analysis of more than 100 river water samples.     

The preparation of thick-film glass capillary columns

A detailed method for the routine preparation of glass capillary columns is presented. The method consists of coating a glass tube with quartz powder prior to pulling the tube into a capillary. The inner surface of the capillary consists of an even distribution of quartz particles fused to the walls. This surface has been found readily deactivated by standard procedures and ideal for the preparation of thick-film glass capillary columns. The method has been thoroughly tested in two independent laboratories to ensure that the procedures described are reproducible.